Our Ultra Car Seat Covers are designed for effortless installation — they slip on existing seats like a glove. Watch the installation video below for a detailed guide on securing your Ultra Car Seat Covers perfectly.
Open the top zipper to allow you to slot it over the headrests down to the seats. This ensures a secure fit and keeps the mat in place during installation.
Carefully pull down the seat cover back onto your seats and push into the middle to form its shape around your seat contour.
Use the secure discs provided to install them onto the two straps and tuck them into your seat gaps. This keeps your mats firmly in place and prevents shifting during driving.
Ensure the base cover is installed with the correct orientation. The rectangle-shaped end should face toward the seat.
Once the discs are aligned, carefully reattach them to the mounting bracket. Then, slide the assembled unit through the gap between the seat and the floor to position it correctly in your vehicle.
Attach the metal hooks onto the front strap of your car mat. Then secure them anywhere on your vehicle under the seats for a firm, stable fit that prevents shifting during driving.
Add a brief description or instruction for this step here. Explain what the user needs to do in simple language so they can follow along easily.
Repeat the same installation process on the other front seat. Once complete, your front row seat covers are fully installed and ready to use.
Position the two side base covers so the stripe runs vertically down the center of each cover. Ensure the velcro attachments face inward toward the mat base. Align them symmetrically on either side and press firmly to secure.
Attach the secure discs and slot them through the seat gap, then tuck them in tight to ensure a snug fit and prevent movement.
Locate the black tabs on the underside of the rear row seat mats. Carefully insert these tabs into the vehicle trim beneath the seats. Ensure both sides are secure before testing the mat position.
The middle base piece is the plain rectangular piece that sits on top of the two side covers. Secure it using the same method as the side covers. If the middle piece covers your seatbelts, contact us with your measurements and we'll supply a free replacement at no cost.
Position the back pieces along the sides of your headrests with the curved edge facing outward. Align the headrest cover to match your headrests precisely. Secure both pieces using the same discs you used for previous steps.
Some vehicles feature a small rectangular attachment point on the rear row headrest, while others do not. If your vehicle has this feature, the included rectangular piece is designed to secure the mat in place at the headrest.
Position the middle back piece—the one with velcro sides—behind the two side covers. If your vehicle has a dropdown cup holder that you'd like to access, you can remove this piece at any time.
Secure the seat covers with the discs. You can use one disc on two straps and tuck them into the gaps between the seats and backrest for a snug fit.
Congratulations on successfully installing your rear row seat covers! Your interior protection is now complete. Take a moment to adjust the covers for a perfect fit, and ensure all attachment points are secure. Your investment in quality car protection is now protecting your vehicle.
